Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15
  1. #11
    Administrator Randy's Avatar
    Join Date
    May 2006
    Location
    Suffield, OH
    Posts
    2,488

    Re: String and cable installation

    As long as you put in the proper number of twists, you will be in good shape.
    Randy Wood
    Director of Customer Experience
    TenPoint Crossbow Technologies

  2. #12
    aronbo
    Guest

    Re: String and cable installation

    Randy - 9/29/2011 12:18 PM

    As long as you put in the proper number of twists, you will be in good shape.
    Randy i noticed a good deal of pressure coming from the rail pushing on the string about 3/16 . i also noticed more twist on the bottom yokes than the top yokes. wouldn`t that create a type of cam lean therefore crating more pressure on the string riding on the rail. i thought the string should just touch the rail. the riser to rail bolt is tight.

  3. #13
    Senior Member allchokedup's Avatar
    Join Date
    Dec 2011
    Location
    Tennessee
    Posts
    388

    Re: String and cable installation

    It would be great if there was a video or diagram on string and cable installation.

  4. #14

    Join Date
    Mar 2010
    Location
    Iowa
    Posts
    1

    Re: String and cable installation

    Great question and thanks TenPoint for the good information I'm sure it will help many.

  5. #15
    Senior Member
    Join Date
    Sep 2012
    Location
    Bowhunting in 5C&5D Pa
    Posts
    134

    Re: String and cable installation

    This is a good read....when its time..my XLT2 is going back to TP...
    ~~Brown on DaGround~~
    Ten Point
    Turbo XLT2
    BlackEagle executioners bolts
    Rage Broadheads
    SDS system/Bowjax
    Lumenoks



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •